After the installation, restart your personal firewall software. Press left or right triangle to choose DHCP. If the installation screen does not appear automatically, click here to see how to open the installan. Even if you have printed with USB connection, you need to install the printer driver for network connection. You should be able to see the printer in connected devices. The initial Network Name could be the manufacturer’s name or the model name.
|Date Added:||2 September 2015|
|File Size:||43.36 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Move your machine closer to the access point and try starting from Step 3 again.
How to connect Brother MFCCW/MFCCDW printer to pcWRT wifi – pcWRT
How does the information on this page help you? Blog Forums Login Demo. Check and record the current wireless network settings below.
Very helpful Helpful Not helpful.
Brother MFCCW Support
The encryption type should match what that of the pcWRT router. Press left or right triangle to choose DHCP. If your question was not answered, have you checked other FAQs? Go to the Manuals section.
February 3, at 4: By default, this should be There are three steps to set up a wifi connection with the printer. You should be able to see the printer in connected devices. Check the printer IP address: The printer will restart automatically. Contact Us Product Registration Visit www. Continue to the following steps to install the printer driver for network connection.
Log in Register Forums. If the printer hostname is displayed in gray, click the hostname, enter a new name if you wish, then click Save. If the mdc-6490cw screen does not appear automatically, click here to see how to open the installan. The screens may differ depending on operating system being used and your Brother machine. Choose Yes to apply your settings.
Have you checked the manuals? Extended Service Set ID. If there are any programs running, close them. Go to the Contact Us section.
Go to Step If the connection failed, the display shows Connection Failed for 60 seconds. Important points you need to confirm before configuring your Brother machine for a wireless network. To help us improve our support, please provide your feedback below.
If you have previously configured the wireless settings of the printer, you must reset the network LAN settings before you can configure the wireless settings again. If connection is successful, the display shows Connected for 60 seconds and configuration is completed. Log in the pcWRT console, click Status. The machine starts to connect to the pcWRT router.
After the installation, restart your personal firewall software.