To improve heat dissipation, remember to spray thermal 5. Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. See the table below for connection details in accordance with the type of speaker you use. Ratio Actual Value This is a read-only item, which displays the ratio actual value of this motherboard.

Uploader: Tecage
Date Added: 11 April 2018
File Size: 18.80 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 64114
Price: Free* [*Free Regsitration Required]

Infrared Port Address Use this item to set the address for the onboard infrared port or disable it.

Asrock P4DualGL driver – Asrock Sound Card Drivers –

Fasten the card to the chassis with screws. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice.

Ring-In Power On Use this item to enable or disable Ring-In signals to turn on the system from the power-soft-off mode. If it has been installed, updating overwrite-installing may fix problems, add new functions, or expand existing ones. If you use the ratio value to time the CPU frequency, p4dula-915gl will be equal to the core speed of the installed processor. The current SATA interface allows up to 1. Therefore, if you wish to install this audio version, click the download button and apply the package.


This motherboard supports Dual Channel Memory Technology. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Unlock a DIMM slot by pressing the retaining clips outward. Position the CPU directly above arock socket such that its marked corner matches asrockk base of the socket lever.

It requires larger heatsink and cooling fan to dissipate heat. Make sure to set the partition of the Primary IDE hard disk drives to active. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written p4dual-915gll of ASRock Inc.

You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation.

Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified. Otherwise, it will operate at single channel aduio. Do NOT place jumper caps over these headers and connectors. Install the SATA hard disks into the drive bays of your chassis.


Download file

If this feature is enabled, it will enhance hard disk performance by reading or writing more data during each transfer. Up to 5 monitors display capability – 4 ports of SATA 1.

Supports up to 2 floppy disk drives Audio: For microphone input, this motherboard supports both stereo and mono modes. You may also select other value as operating frequency: Refer to your OS documentation for more information. It is highly recommended to always use the most recent driver version available. The lever clicks on the side tab to indicate that it is locked.

Please connect an ATX power supply to this connector. Bear in mind that, even though other operating systems might be compatible as well, it is not recommend that you apply any software on platforms other than the specified ones.

Unplug the power cord from the wall socket before touching any component. Operation is subject to the following two conditions: While CPU overheat is detected, the system will automatically shutdown.

Please refer to the instruction of your IDE device vendor for the details.