APOGEE ALTA U47 DRIVER

Pin 3’s specific function is to produce an output pulse indicating when an exposure is occurring; the Shutter Strobe Period and Shutter Strobe Position controls allow you to specify the duration and offset phase of this pulse with respect to the shutter open signal. Transmitter and Receiver, including 2 power supplies. The same dialog box is available while the camera is connected, by clicking the Options button on the Settings Tab and selecting the Camera Settings command. In built shutter – Shutter during readout and take dark reference frames – 25, 43mm or 63mm. Pins 1, 4, and 5 are associated with modes and options controlled by the main Apogee Alta Configuration dialog, and are forced into specific states when those modes are selected. The bit mode provides the highest speed, while the bit mode provides the highest dynamic range. Back-illuminated sensors with very high quantum efficiency, some with sensitivity in the deep UV; Interline transfer sensors with fast electronic shuttering and inherent anti-blooming; front-illuminated CCDs with high sensitivity in the near-IR without etaloning and a range of resolution options up to

Uploader: Bragore
Date Added: 7 July 2009
File Size: 32.17 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92184
Price: Free* [*Free Regsitration Required]

They can be set to illuminate when the camera is in Expose mode unless disabled by OFF when exposingwhen the camera is Activeduring Flushing to remove charge from the array, when an Ext Trigger is received, Wait Trigger to show when the camera is waiting for a trigger, Ext Shutter to show the state of the external shutter, Ext Readout to show the state of the external readout trigger, and when the camera has stabilized At Paogee.

Transmitter and Receiver, including 2 power supplies. Selecting Triggered mode or either external shutter option without providing the appropriate control signals to the camera will cause MicroCCD to hang when an exposure is taken.

These apigee are expressed in microseconds. Cooling performance down to 50 0C below ambient ensures optimal signal to noise for long exposure applications.

  CANON MF5650 64 BIT DRIVER DOWNLOAD

To prevent light contamination under very low-light imaging conditions, you can select U447 when exposing. In Normal mode, an exposure begins and ends at times as instructed by MicroCCD; in Triggered mode, the program merely “arms” the camera, and a TTL-level signal must be presented on AUX Pin 1 to actually start the exposure and its timer.

The same dialog box is available while the camera is connected, by clicking the Options button on the Settings Tab and selecting the Camera Settings command. Apogee Alta cameras are available with a wide variety of sensors, including: The camera selection dialog box is brought up when the Discover Shutter apoge Readout does the same, but in addition requires a second TTL-level signal on Pin 5 to start readout. For this driver, please select Apogee Alta on the Setup tab.

The Apogee Alta family has been a mainstay of high performance imaging for many years, offering a wide range of full frame and interline CCDs up to Normally this is turned off, but in some applications the overscan region is used as part of the calibration process. By submitting this form I agree that Oxford Instruments will process my data in the manner described in the Privacy Policy.

Apogee Alta

Back-illuminated sensors with very high quantum efficiency, some with sensitivity in the deep UV; Interline transfer sensors with fast electronic shuttering and inherent anti-blooming; front-illuminated CCDs with high sensitivity in the near-IR without etaloning and a range of resolution options up to The Exposure and Shutter Options set the camera operating Mode.

Use Bgd determines whether an apogde background level is subtracted from every pixel during the conversion; it is equivalent to the Auto checkbox in the Convert RGB dialog.

Pin 3’s specific function is to produce an output pulse indicating when an exposure is occurring; the Shutter Strobe Period and Shutter Strobe Position controls allow you to specify the duration and offset phase of this pulse with respect to the shutter open signal. The two Status Indicator lights can be configured to provide basic status information.

  ADESSO WKB-3200UB DRIVER

The bit mode provides the highest speed, while the bit mode provides the highest dynamic range. Different settings of these controls should be tried if the automatic color conversion process produces unsatisfactory results. In built shutter – Shutter during readout and take dark reference frames – 25, 43mm or 63mm.

Apogee Alta – Andor – Oxford Instruments

MicroCCD does not provide a mechanism for this itself; customer-furnished software is required. See below for an explanation of the camera discovery feature. You may also be interested in All Color Synthesis controls are disabled when connected to a camera that does not have a color mask.

Pins 1, 4, and 5 are associated with modes and options controlled by the main Apogee Alta Altx dialog, and are forced into specific states when those modes are selected.

This dialog is described below. Ideal for OEM and astronomy applications, the Apogee Alta family has been a mainstream of high end imaging for many years, offering a apogfe range of full frame and interline CCDs.

High resolution sensors – Sensors up to You can also indicate whether to Digitize Overscan. Cameras connected via Ethernet support only bit mode. Open in a new tab. If the camera is selected as USB, only the Device Number control is available; set it to the camera identifying number, as enumerated by the operating system. All aalta for the Apogee Alta are under the Advanced Fan Setting can be set to HighMedium xlta, Lowor Off according to the amount of heat produced by the Alta’s thermo-electric cooler and any constraints imposed by power consumption, noise and vibration.