Connect a stereo cable from the lineout jack of your external device to this line-in jack. Lever 20 Hardware Installation 2 3. Click Start, point to Settings then click Control Panel. This can indicate that CMOS has become corrupt. Prices and specifications are subject to change without notice.

Uploader: Vorisar
Date Added: 1 January 2013
File Size: 47.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 86823
Price: Free* [*Free Regsitration Required]

You will not be able to push the lever down if the direction is incorrect. The screen seems to be constantly wavering.

If the printer remains inoperative, replace the printer cable and try again. Full Transmits and receives data simultaneously.

Locate Socket on the system board. Make sure pin 1 of the cable connector is aligned with pin 1 of J1.

DFI P-AL Motherboard |

The manufacturer makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Enter 848p-aal to correct the error. The USB por ts may be mounted on a card-edge bracket.

Coupons are not applicable to prior orders. If a wrist strap is unavailable, establish and audil contact with the system chassis throughout any procedures requiring ESD protection. Use this option if your video board supports it.


The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

DFI 848P-AL User Manual: Audio Drivers

EXE to a floppy disk. The sequence of the pin xudio on some IrDA cable may be reversed from the pin function defined on the system board.

If you selected an option other than the default setting and is unable to boot up the system, there are 2 methods of booting up the 848p-a and going back to its default setting. Use another diskette with adequate storage space. Gently press each component into the socket.

Save DMI File 1. The only time you might consider making any changes would be if you discovered some incompatibility or that data was being lost while using your system.

DFI P-AL – motherboard – ATX – Socket – iP Overview – CNET

This will allow the system to boot according to the FSB of the processor. Write your own review.

Keyboard error or no keyboard present Cannot initialize the keyboard. Move the retention levers to their opposite directions then push them down.

Check that one end of the AC power cord is plugged into a live outlet and the other end properly plugged into the back of the system. After installing the audio driver and rebooting the system, you can run 3D Audio Configuration either from the taskbar or from the Control Panel. You may be writing to the wrong drive. If more than 16MB of system memory is installed, this field must be disabled to provide contiguous system memory.


One code indicates that a video error has occured and the BIOS cannot initialize the video screen to display any additional information. If necessary, try another outlet.

It will not light when the system is in the Soft-Off state. The network will detect Magic Packet and assert a wakeup signal to power-up the system. File Name to Program: BIOS Setup 3 3. Sign Up Today Do you love tech deals? You must type the correct password to poweron the system.

Some of the most common things to check when you encounter problems while using your system are listed below.